MIC Electromagnetic Clutch
(Torque Range: 2~7in-lbs / 0.25~0.8Nm)
Small clutches for use in copy machines, printers, and other peripheral devices. This one-piece assembly features a custom-molded gear or timing pulley designed to your specifications. Most clutches use a permanent magnet to disengage the armature when it is not in use. All clutches are bi-directional. A three pronged dog bone output is also available.
MIC Electromagnetic Clutch Links
Ogura Design Advantages
CUSTOM MOLDED GEAR
The MIC assembly includes a custom-molded gear or timing pulley designed to your specifications. A three pronged dog bone output is also available.
ONE PIECE ASSEMBLY
The entire assembly is delivered pre-assembled, so it simply slides onto the shaft. There are no adjustments to make or gaps to set.
BI-DIRECTIONAL OPERATION
The clutch has the ability to drive clockwise or counterclockwise.
PERMANENT MAGNET RETURN
All standard units come with a permanent magnet armature return attached to the inside of the gear. This provides a fast and smooth disengagement of the armature when power is released to the clutch coil.
ZERO BACKLASH
If needed the armature can incorporate a one-piece spring that eliminates backlash.
LONG LIFE
Special bushings allow for millions of operating cycles for most applications.
D-CUT BORE
The bore of the clutch is made to fit a D-cut shaft to simplify installation and eliminate the need for set screws.
Models and Dimensions
| Model No. | Ogura P/N | Static Torque (ft-lbs) | max RPM | Bore (inch) | Volts/ Watts | Keyway | Wgt (lbs) | PIC | DXF | 3D | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIC-2.5T | 0 | 0.183 | 300 | 6mm | 24/3.4 | D-cut | 0.07 |  |  |  |
|
| MIC-2.5 | 0 | 0.183 | 300 | 6mm | 24/3.4 | D-cut | 0.11 |  | | ||
| MIC-3.5T | 0 | 0.253 | 300 | 6mm | 24/3.7 | D-cut | 0.07 | | | |
|
| MIC-5T | 0 | 0.361 | 300 | 6mm | 24/3.7 | D-cut | 0.13 | | | ||
| MIC-5 | 0 | 0.367 | 300 | 8mm | 24/3.7 | D-cut | 0.20 | | | ||
| MIC-8 | 0 | 0.591 | 300 | 8mm | 24/3.7 | D-cut | 0.26 | | |